Auto tube expanding machine МER-16M-2

TUBE EXPANDING MACHINE MER-16M-2

Available for steel tubes from 8 mm to 25 mm O.D.

Specifications

video Tube expanding machine. DOWNLOAD

- Dimensions of the actuator without the lateral arm and eye, mm, not more . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	420х91х255
- Dimensions of control machine, mm, not more . . . . . . . . . . . . . .	330х310х180
- Overall dimensions disassembled in box, mm, not more . . . . . .	500х350х350
- Total weight, kg, not more . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	11
- Weight of actuator, kg, not more . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	3,8
- Weight control machine, kg, not more . . . .. . . . . . . . . . . . . . . . . . . . . . . . .	7
- Rated motor power, kW . . . . . . . . . . . . . . . . . . . .	1,05
- Consumption current, A, not more . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	5
Supply voltage, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	220±22
- Frequency of rotation on x/x, R/min . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	550
- Number of speeds . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . .	1
- The size of the square of the castle of tool, mm . . . . . . . . . . . . . . . . . . . . . .	10
Guaranteed torque, N•m (kgf•m):
the least . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	2,0 (0,20)
the greatest . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	45,0 (4,5)
- Approximate outer diameter valchemy pipes from steel (non-ferrous alloys), mm:
the least . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . .	8x1 (8x1)
the greatest . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	25x3 (32x1,5)
- Reduced error of the torque limiting . . . . . . . . . . + 5 %	+ 5 %

The drive control machine

Electronic control system with a flare will organize a series of expanding: start the engine, testing to the specified torque, stop, reverse inclusion. In automatic mode, the cycles are repeated. The duration of the pause between cycles is adjustable.

Technical characteristics of the drive control machine

- Programmable logic controller Segnetics

- 4-line digital display for displaying modes and parameters of the expanding process, archive read data by expanding each connection

The setpoint torque in N•m

- Set the time of the reverse from 1 to 50 seconds

- Set delay time 1 to 50 seconds

Archive data display in the beading of each connection (up to 1000 compounds)

Additional equipment on request:

USB interface for connection to laptop:

- data output for program control of the correctness of the chosen moment

- a conclusion of the achieved points for the certification and processing of data

- APCS of expanding