2. Products
3. TECHREMEX
4. Tube expanding and rolling machine for heat exchangers
5. Portable TUBE EXPANDING MACHINE МER-16M

Portable TUBE EXPANDING MACHINE МER-16M

Available for steel tubes from 16 mm to 38 mm O.D.

Maximum tube sheet O.D. which can be done without repositioning of the machine at the heat exchanger : 1500 mm

Dimensions : 1500х700х700mm

DESIGN AND TECHNICAL PARAMETERS OF THE MAIN NOBELS, EXCEPT FOR THE RACK, SAME Auto tube expanding machine MER-16M

        THE MAIN NODELS OF AUTO TUBE EXPANDING machine МER-16M

1.       Portable stand.
2.      The control unit is adapted to a programmable logic controller (PLC) Signetics.
3.       Geared motor MR (Italy) controlled by a control unit with frequency Converter DELTA.
4.       Telescopic shaft with splined pair TKW (Germany), hinge TGN (Germany).
5. Tool balancer TSW.
6. Leg three-button remote control.
7. Overhead support arm. 
8.       Tube expanding tool type “B”

All nobels and assemblies, as well as, most of the components used for the production of a portable machine MER-16M - imported (Germany, Italy).

All machines Techremex for tube expanding type MER certified according to GOST R.