50 ЛеТ
Volzhsky Ave., 4K, 400016,
Volgograd, Russia
+7 (8442) 98-07-07
+7 (8442) 98-07-07
[email protected]

TUBE EXPANDING MACHINE МER-16M-3-48


Available for steel tubes from 16 mm to 42 mm O.D. Suspension using a balance beam.

Safe voltage, low noise, compact size, and the possibility of long continuous operation make this machine necessary for large volumes of work, especially inside chambers.

The control unit CU based on the programmable logic controller (PLC) Segnetics. It is serve to control the MR using a special BLD driver that provides smooth start of the MR and high-precision torque control. CU have connector RS 232 to connect to the computer. CU organizes a series of expanding: start the engine, testing to the specified torque, stop, reverse activation. In automatic mode, the cycles are repeating. The duration of the pause between cycles is adjustable.

  • Power supply: 220 V, 50 Hz
  • Power output: no more than 700 Watts
  • Dimensions: 440х350х210 mm
  • Weight: no more than 10 kg

Geared motor MR made on the base of the engine with a safe voltage of 48 V.

  • Power output: 565 Watts
  • Dimensions: 250х400х120 mm

The control key placed directly on the gear motor.

A spring balancer provide for suspension to compensate for the weight of the gear motor.

Main technical characteristics of the CU and additional equipment on request (see the description of the machine MER-16M-2)

Gear motor MR

Geared motor no.

Torque, N•m

Speed rpm

The size of the internal square of the lock, mm

Weigh, kg

Approximate O.D. of expanding tubes, mm

min

max

Non- ferrous metals

Steel

МР-565-300-48

5

40

300

10

7,8

16 – 38

16 - 32

МР-565-120-48

10

100

120

14

8,8

32 – 45

28 – 42

 

 



Яндекс.Метрика TECHREMEX-LRT Ltd
Cal back
soon
Thank you, we will call you back!